Metal 92"t Mission Arbor Gate Entrance

Keep in mind that we can take any of our arbors and place posts and a gate inside. Our Mission Arbor Gate has a great look for your entrance or out in a landscape. The height is 92" and we can fit 4 widths so the top spans 69" to 90". For most people the measurement they are concerned with is the Post-to-Post opening inside the arbor. That range is 53" - 74" wide. Installed this gate is 5' tall. The arbor sides are 24" front to back and the top of the arbor is 29" front to back.

To have a secure center divide gate 2 posts are needed to support each side of the gate that we put on the inside of the arbor sides. Because our photos of our arbor gate example are staged and not installed, we do not show the posts accurately. Arbor, Gate, Posts, Latch and ground receiver are included.

Arbor Top Width:

69" makes a 53" opening

76" makes a 60" opening

83" makes a 67" opening

90" makes a 74" opening

If you are wanting to bolt your arbor gate down to cement or decking we can add metal welded-on base plates with pre-drilled holes for installation. The photo with Susan holding the posts shows tall ones that would be buried into the ground.